Fingerprint Password Smart Mini Gun Safe 8711 Toughguy

Fingerprint password smart mini gun safe 8711 Toughguy

Feature

1.Super B-level anti-theft security copper cylinder, mutual opening rate as low as 1/100,000, which is 1/100-200 of other safe, the best and only one in gun safe industry

2.Rigorously selected geared motor, with high overload capacity, high energy saving, and a service life of 10,800 times, ensuring stable operation of the motor for 29.5 years

3.The fingerprint chip will unlock safe within 0.5 seconds

4.Fingerprint, password, fingerprint+password, metal key 4 unlocking methods 

5.Pop-up door

6.The noise of opening the safe is only 68 decibels, making it safer to retrieve the gun at night（on silent mode）

7.Smart and cute,can be placed in a drawer, under the car seat, in a backpack or luggage

8.Matte black surface, elegant and generous

9.Coating on inside and outside surface , 360 degree beautiful without dead corners

10.Built-in blue lighting inside the box, will not dazzle the eyes

11.Backlight keypad

12.Equipped with an anti-cutting steel cable with a diameter of 4mm(5/32'' dia & 4.1 feet longth ), with a tensile strength as high as 1500kg (3300Lb)

13.Hidden prying-resistant hinge，can't be destroyed from the outside

14.The thickness of the steel is 1.9mm (14 Gauge)

15.The safe can work for 2.5 years with one charge (it is recommended to charge once every 6 months to maintain battery activity)

16.USB TYPE-C charger port, compatible with all Android smartphones

17.High-density sponge, the gram weight reaches 32kg/M3（2 Lb/ft3）, the gram weight of counterpart products is generally 20kg/M3(1.2 Lb/ft3)

18.TSA-APPROVED,Put the firearm in the safe,put it in checked luggage,legally carry the firearm on plane

19.Semiconductor fingerprint chip is produced by Apple's supplier, the world-renowned high-tech company BYD

20.Built-in 2500mah 18650 ternary lithium battery (ternary lithium is the most expensive and best 18650 battery material), life is up to 800 charge-discharge or 15 years (cheap battery  has only 1-2 years life)

21.Super fingerprint reader,scratches of knife doesn’t affect identification

22.Fingerprint+code dual authentication access function, verify fingerprint and code at the same time to unlock

23.As many as 150 users

24.12*12mm super large area fingerprint recognition module

25.Support up to 46656 combinations

26.Eco-friendly & kids friendly coating， dried at 185℃（365℉ ），protect the safe from rust

27.When the voltage is lower than 3.5V, the system will flash the light to prompt charging

28.Large space, you can put 1-2 pistols

29.The fingerprint module has a breathing aperture, which serves as a reminder when setting it, and also makes the safe more beautiful

30.2 Predrilled holes in the bottom for easy mounting on the wall or inside the cabinet

31.Built-in anti-prying steel wall on 3 sides of safe to prevent forced opening

32.The cylinder is made of high quality pure copper & other safes on market use zinc alloy cylinder

33.The circuit board still works normally at - 30℃（-22°F） to 70℃（158°F）

34.Ultra-low power design, power consumption is only 60μA per day

35.The inner wall of the safe is covered with sponges on all six sides to prevent the guns from being scratched

36.No need to replace batteries for 15 years, which is equivalent to using 60 dry batteries less, contributing to environmental protection

37.Silent mode, in this mode, the button and fingerprint prompts will be shielded, and you can quietly open the safe at night when you encounter danger

Specification    

* Battery   2500mah  18650 Ternary lithium battery  
    
*Battery life  800 charge and discharge (15 years)  
    
*Battery voltage  3.7v  
    
*Battery charging time  3h  
    
*Recommended charging interval  6 months  
    
*Static power  60μA  
    
*Dynamic power consumption  3ma  
    
*Battery run time  2.5 years  
    
*Overcharge protection voltage  4.25v  
    
*Low voltage alarm  less than 3.5v  
    
*Unlocking methods  Password,fingerprint,[fingerprint+password dual authentication],manual key  
    
*User quantity  Password 50，fingerprint 50，fingerprint+password 50  
    
*Digital longth  6  
    
*Number of passwords  46656  
    
*Charger port  USB TYPE-C  
    
*Fingerprint module resolution  508DPI  
    
*Fingerprint feedback time  0.5S  
    
*Steel plate thickness  1.9mm（14Gauge）  
    
*Steel rope diameter & Longth  4mm(5/32'' ) & 104mm(4.1 ft)  
    
*Tensile strength of steel cable  1500kg(3300Lbs)  
    
*Working temperature range  -30℃~70℃(-22℉~158℉)  
    
*Motor life  10800 times，29.5 years  
    
*Fingerprint chip supplier  BYD  
    
*Fingerprint window size  12*12mm（0.47‘*0.47‘’）  
    
*Sponge density  32kg/M3（2 Lb/ft3）  
    
*Exterior dimensions  68(H) x 234 (W) x300 (L) MM（2.6 x 9.2 x 11.8''）  
    
*Interior dimensions  65(H) x 177 (W) x297 (L) MM（2.5 x 6.9 x 11.7''）  
    
*Net weight   3.5kg(7.7Lbs)  
    
*Working voltage  3.5-4.2V  

Packing    

Product packing box size  332x266x97mm(13x10.5x3.8'')  
    
Weight/product packing  4.2kg  
    
Carton size  352 x 286 x505cm(13.8x11.3x19.8'')  
    
Pcs/Carton  5 pcs  
    
Gross weight/Carton  22kg(48.4lbs)